Login  |  Registrati  |  Carrello: 0
  • ITALIANO
  • ENGLISH
  • SOCI BENEMERITI
  • SOCI SOSTENITORI
  • L'ASSOCIAZIONE

AIM
Via Filippo Turati 8, 20121, Milano
Tel. +39.02.76021132 -
+39.02.76397770
Fax. +39.02.76020551
Email: aim@aimnet.it

02/12/2021
Raw Materials & Recycling
  SCOPE The environmental and economical sustainability of the metallurgical industry depends on the possibility to recover and recycle the metal products after their use. On the other hand... [..]

20/10/2021
10th European Conference on Continuous Casting
 We are pleased to announce the 10Th European Conference on Continuous Casting - ECCC2020, with focus on the status and future developments in the casting of steel, that will be held in Bari... [..]

  • home
  • come associarsi
  • manifestazioni
  • pubblicazioni
  • rivista
  • centri di studio
  • novita'
  • bacheca
  • contatti
  • PUBBLICAZIONI
  •  / LA METALLURGIA ITALIANA
  •  / NOVEMBRE DICEMBRE 2015 / 

novembre dicembre 2015


memorie:

  • Evoluzione della microstruttura, della texture, del comportamento anisotropo e della superplasticità della lega ZK60 processata mediante ECAP
    E. Mostaed, M. Vedani, A. Fabrizi, F. Bonollo
  • Austempering kinetics of a ductile iron
    M. Pellizzari, C. Menapace, G. Straffelini, M. Cazzolli, M. Dal Molin, F. Vettore, E. Veneri
  • Microstructural characterization and layer stability of low-temperature carburized AISI 304L and AISI 904L austenitic stainless steel
    G. Maistro, L. Nyborg, Y. Cao, S. Vezzù
  • Non-destructive in situ monitoring of the microstructural development in high performance steel components during heat treatment
    O. Bruchwald, W. Frackowiak, W. Reimche, H. J. Maier
  • Investigation of martensite formation in Fe based alloys during heating from boiling nitrogen temperature
    M. Villa, T. L. Christiansen, M. F. Hansen, M. A.J. Somers
  • Effect of underwater wet welding conditions on the diffusible hydrogen content in deposited metal
    D. Fydrych, A. Świerczyńska, G. Rogalski





TORNA A ELENCO COMPLETO

PUBBLICAZIONI


  • VOLUMI
  • ATTI DI CONVEGNI
  • ATTI DI CORSI E GIORNATE DI STUDIO
  • LA METALLURGIA ITALIANA
26/04/2021

ECHT 2021 and QDE – 2nd International Conference on Quenching and Distortion Engineering - 26 – 28th of April 2021 - Berlin/Germany
ECHT and QDE 2021 will present research and practical procedures relative to the control of a component´s distortion by an interdisciplinary approach starting at the design phase up to the final heat treatment and eventual hard machining, including, most prominently, quenching.
Informations and Submission of abstracts of the website www.echt-qde-2021.de
Website: https://www.echt-qde-2021.de

05/07/2021

TMP2021: NEW DATE - The local organizing committee inform that we have to decide to postpone the 6th TMP Conference to 2021 because of the COVID-19 pandemic. 6th TMP Conference will be held in Shenyang, China on July 5th (Monday) - July 7th (Wednesday), 2021.
Website: https://tmp2020.medmeeting.org/en

ASSOCIAZIONE
ITALIANA
DI METALLURGIA


Via Filippo Turati 8,
20121, Milano
Tel. +39.02.76021132 -
76397770 - 76397763
Fax. +39.02.76020551

Email: aim@aimnet.it
P.IVA 00825780158

Informativa Privacy
Copertina_Metallurgia
Soci benemeriti
Soci sostenitori
L'associazione
Centri di studio
Come associarsi
Pagamento
Manifestazioni
Pubblicazioni
Ambiente e sicurezza
Acciaieria
Centro Aim-assofond per la fonderia
Controllo e caratterizzazione dei prodotti
Corrosione
Lavorazioni plastiche
Materiali per l'energia
Metalli e tecnologie applicative
Metalli leggeri
Metalli non ferrosi
Metallurgia delle polveri
Metallurgia fisica e scienza dei materia pressocolata
Refrattari e ceramici avanzati
Rivestimenti
Saldatura e giunzioni permanenti
Storia della metallurgia
Sviluppo dei trattamenti termici
Trattamenti termici e metallografia
web agency

Per offrirti il miglior servizio possibile questo sito utilizza cookies. Continuando la navigazione nel sito autorizzi l'uso dei cookies. Per saperne di piu' clicca qui.            OK