Login  |  Registrati  |  Carrello: 0
  • ITALIANO
  • ENGLISH
  • SOCI BENEMERITI
  • SOCI SOSTENITORI
  • L'ASSOCIAZIONE

AIM
Via Filippo Turati 8, 20121, Milano
Tel. +39.02.76021132 -
+39.02.76397770
Fax. +39.02.76020551
Email: aim@aimnet.it

20/10/2021
10th European Conference on Continuous Casting
 We are pleased to announce the 10Th European Conference on Continuous Casting - ECCC2020, with focus on the status and future developments in the casting of steel, that will be held in Bari... [..]

02/12/2021
Raw Materials & Recycling
  SCOPE The environmental and economical sustainability of the metallurgical industry depends on the possibility to recover and recycle the metal products after their use. On the other hand... [..]

  • home
  • come associarsi
  • manifestazioni
  • pubblicazioni
  • rivista
  • centri di studio
  • novita'
  • bacheca
  • contatti
  • PUBBLICAZIONI
  •  / LA METALLURGIA ITALIANA
  •  / GENNAIO 2016 / 

gennaio 2016


memorie:

  • Corrosione per pitting di strumenti chirurgici in ambiente disinfettante: cause e rimedi
    L.Pezzato, B.Taverna, M.Magrini
  • Metodo innovativo per la modellazione di curve di trazione di materiali metallici ad alte temperature
    R. Donnini, M. Maldini, D. Ripamonti, G. Angella
  • Design of quenching units for heat treatment of tubes
    M. Chabicovsky, J. Horsky, M. Raudensky, M. Hnizdil, P. Kotrbacek
  • Influence of casting parameters on shrinkage porosity of 19 steel ingot
    C. Zhang, Y. Bao, M. Wang
  • Studies on variations in microstructure and hardness of AA7075–T651 aluminum alloy friction stir welds
    T. S. Rao, G. M. Reddy, S.R. K. Rao
  • Research on ridge buckle of high accuracy cold rolled thin strip at local high points during the coiling process
    W.Q.Sun, X.Y.Zhang ,A.R.He, J.Shao





TORNA A ELENCO COMPLETO

PUBBLICAZIONI


  • VOLUMI
  • ATTI DI CONVEGNI
  • ATTI DI CORSI E GIORNATE DI STUDIO
  • LA METALLURGIA ITALIANA
26/04/2021

ECHT 2021 and QDE – 2nd International Conference on Quenching and Distortion Engineering - 26 – 28th of April 2021 - Berlin/Germany
ECHT and QDE 2021 will present research and practical procedures relative to the control of a component´s distortion by an interdisciplinary approach starting at the design phase up to the final heat treatment and eventual hard machining, including, most prominently, quenching.
Informations and Submission of abstracts of the website www.echt-qde-2021.de
Website: https://www.echt-qde-2021.de

06/05/2021

A causa delle restrizioni in atto per fronteggiare la pandemia da Covid-19 il Comitato Organizzatore del 27° Convegno Nazionale Trattamenti Termici ha deciso di posticipare l'evento. Il Convegno si terrà il 26 e 27 maggio 2022 a Genova, presso i Magazzini del Cotone.
Website: http://www.aimnet.it/tt.htm

05/07/2021

TMP2021: NEW DATE - The local organizing committee inform that we have to decide to postpone the 6th TMP Conference to 2021 because of the COVID-19 pandemic. 6th TMP Conference will be held in Shenyang, China on July 5th (Monday) - July 7th (Wednesday), 2021.
Website: https://tmp2020.medmeeting.org/en

ASSOCIAZIONE
ITALIANA
DI METALLURGIA


Via Filippo Turati 8,
20121, Milano
Tel. +39.02.76021132 -
76397770 - 76397763
Fax. +39.02.76020551

Email: aim@aimnet.it
P.IVA 00825780158

Informativa Privacy
Copertina_Metallurgia
Soci benemeriti
Soci sostenitori
L'associazione
Centri di studio
Come associarsi
Pagamento
Manifestazioni
Pubblicazioni
Ambiente e sicurezza
Acciaieria
Centro Aim-assofond per la fonderia
Controllo e caratterizzazione dei prodotti
Corrosione
Lavorazioni plastiche
Materiali per l'energia
Metalli e tecnologie applicative
Metalli leggeri
Metalli non ferrosi
Metallurgia delle polveri
Metallurgia fisica e scienza dei materia pressocolata
Refrattari e ceramici avanzati
Rivestimenti
Saldatura e giunzioni permanenti
Storia della metallurgia
Sviluppo dei trattamenti termici
Trattamenti termici e metallografia
web agency

Per offrirti il miglior servizio possibile questo sito utilizza cookies. Continuando la navigazione nel sito autorizzi l'uso dei cookies. Per saperne di piu' clicca qui.            OK